Product Description
Package includes: 1 xTattoo Machine Extra Info Why the machine cannot start? 1.The elastic rod does not touch the contact point of the inclined spring plate: Loosen the screw of elastic rod, rotate down the elastic rod to the contact point, and then regulate the rod to the right position. Finally tighten the screw to lock the elastic rod. 2.The switch is off: Connect it to 220V AC power supply and turn on the switch. The indicator turns red. 3.Both of adjustable knob (VOLTAGE) and V meter hand are in "0": Rotate the adjustable knob clockwise slowly. Simultaneously, V meter hand is also moving and should stop at 10V-12V 4.The elastic rod touches the contact point of front spring so tightly that the machine cannot start and maybe will cause short circuit. Turn on the switch and the indicator turns green (No voltage): Loosen the screw of elastic rod, rotate up the elastic rod and then rotate it down to the contact point, and finally regulate it to the right position. Restart the power, the machine will be ok. 5.Disconnection: Check the foot switch and the plug to avoid disconnecting the cord from the joint position caused by careless jerk. 6.Broken wires: The wires be susceptible to damage while washing and sterilizing the tattoo machine, so please confirm the wires condition and have the broken ones welded before use. 7.Problems of plugs and foot switch: Turn on the switch and check whether the plugs of cord and foot switch are broken or not, when short circuit happens (green indicator). The damaged ones should be welded with electric welding rod.
Product Details
- Amazon Sales Rank: #30097 in Beauty
- Brand: Crazy Cart
- Model: HB-WGG001
Features
- Demension: 3.15 x 1.26 x 3.11 inch / 8 x 3.2 x 7.9 cm(L x W x H)
- Coils: 10 Laps coils; 1.1"(28mm)
- Capacitor: 47UF/ 63V
- Running Speed: 2500 R/Minute
- Spring Thickness : 0.50mm rear spring & 0.50mm front spring
*Why don’t we show the price of Cast 10 Laps Coils Tattoo Machine Liner Shader Gun Hb-wgg001 Silver Black?
Because our price may lower than the manufacturer’s suggested retail price, the manufacturer does not allow us to show you our price until you click to see price...
No comments:
Post a Comment